How to Prevent Solder Ball and Bridging Defects during the SMT Reflow Process
A solder ball is the most common type of defect that occurs in the SMT assembly process. Solder balls, which have a diameter are greater than 0.13mm or they are within 0.13mm of traces, violate the minimum electrical clearance principle. They can adversely affect the electrical reliability of the assembled PCB.
According to the IPC A 610 standard, a PCB is also considered defective when there are 5 solder balls (<=0.13mm) within 600mm^2.
Analysis of Root Causes
The solder ball is very closely related to air or water (trapped in solder paste) vapour escaping from the paste and turning into liquid. If the vapor in solder paste escapes too fast, a small amount of liquid solder will be taken from from soldering joint, and a solder ball will be formed when it cools down.
PCB contains water.
Stored in an unexpectedly humid environment and isn’t dried before assembly.
PCB is too new and was not dried enough.
Too much flux is applied in the solder paste.
The preheat temperature is not high enough, so the flux has failed to effectively vapour out;
A solder paste printing issue due to the stencil not being clean, which causes the solder paste to stick to unexpected areas.
Solder Bridging is another common defect, which occurs when the solder has formed an abnormal connection between two or more adjacent traces, pads or pins, and forms a conductive path.
Analysis of Root Causes
Design the correct pad sizes and spaces according to the recommendation specified in the datasheet.
Reflow profile – when appropriate increase the preheating temperature.
Bake the PCB before printing.
PCB quality -- The thickness of PCB hole’s plating copper is greater than 25?m in order to avoid trapping water in the PCB.
There is no solder mask between adjacent pads.
The pads are spaced too close to one another.
There are residues stuck on the PCB surface or pads.
A dirty stencil with paste sticking on its underside.
A misalignment during solder paste printing
A misalignment when components are placed on the board.
Too high placement pressure will squeeze the paste out of the pads.
Paste slump has occurred or too much paste is applied to the pads.
The preheat temperature is not high enough, so the flux has not activated.
Add solder mask between the pads
Design the pads and stencil aperture to the right size.
Do not mix old and new flux together.
Adjust the solder paste printing pressure.
Adjust the pressure for pick and place nozzles.
Ensure there is a zero print gap between the PCB and the stencil.
Clean the stencil as quickly as possible.
SMT Reflow Oven, Lead free Reflow Oven, High end Reflow Oven, Nitrogen SMT Reflow Oven, Reflow Soldering Oven,Reflow Oven Manufacturer, LED Reflow Oven, PCB Reflow Oven, Reflow Soldering Oven, Customized Reflow Oven, Dual Rail Reflow Oven, China Reflow Oven, Wave Soldering Machine, Dual Rail Wave Soldering Machine, High End Wave Soldering Machine, Nitrogen Wave Soldering Machine, China Wave Soldering Machine, Wave Soldering Machine Manufacturer.
|KAIT provide a full SMT assembly line solutions, including
SMT Reflow Oven Manufacturer,
Wave Soldering Machine,
Pick and Place Machine,
SMT Stencil Printer,
SMT Inspection Machine,
SMT Reflow Oven,
SMT Peripheral Equipment,
SMT Assembly line,
SMT Spare Parts
etc any kind SMT machines you may need, please contact us for more information:
wechat whatsapp:+8613691605420, Skype: flasonsmt, Email: firstname.lastname@example.org
1) This is the first time I use this kind of machine, is it easy to operate?
There is English manual or guide video that show you how to use machine.
If you still have any question, please contact us by e-mail / skype/ phone /trademanager online service.
2) If machine have any problem after I receive it, how can I do ?
Free parts send to you in machine warranty period.
If the part is less than 0.5KG, we pay the postage.
If it exceeds 0.5KG, you need to pay the postage.
3) MOQ ?
1 set machine, mixed order is also welcomed.
4) How can I buy this machine from you? ( Very easy and flexible !)
A. Consult us about this product on line or by e-mail.
B. Negotiate and confirm the final price , shipping , payment methods and other terms.
C. Send you the proforma invoice and confirm your order.
D. Make the payment according to the method put on proforma invoice.
E. We prepare for your order in terms of the proforma invoice after confirming your full payment.
And 100% quality check before shipping.
F.Send your order by air or by sea.
5)Why choose us ?
A. Gold supplier on Alibaba !
B. Trade assurance to US$54,000 !
C. Best price !; Best shipping !; Best service !